Messages/Second messages
RPCS Graphic Error
RPCS Memory Overflow
RPCS Syntax Error
Error & Status Messages on the Control Panel
Description
There is not enough graphics
memory to print the data.
A memory overflow occurred
during the print job. After part
of the data for the page was
printed, the print job was sus-
pended.
Bidirectional transmission
may not be working properly
or the RPCS printer driver set-
tings may not be correct.
There may not be enough
memory or the memory set-
tings for the printer driver
may not match the memory
actually installed on the print-
er.
This message may appear
when the computer is con-
nected to the printer with par-
allel interface.
Solution
Specify the correct memory
capacity in the [Change Acces-
sories...] option in the RPCS
printer driver's print settings
tab. For more information, see
the printer driver's Help.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Specify the correct memory
capacity in the [Change Acces-
sories...] option in the RPCS
printer driver's print settings
tab. For more information, see
the printer driver's Help.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Confirm that the option set-
tings for the printer driver
match the options actually in-
stalled on the printer.
Specify the correct memory
capacity in the [Change Acces-
sories...] option in the RPCS
printer driver's print settings
tab. For more information, see
the printer driver's Help.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Set the parallel interface mode
of the computer to a mode
other than ECP.
5
61