Alignment Track Installation - DaVinci Maestro Collection Square Owner's Manual

Alignment Track Installation

The alignment track is optional. We recommend using the track because it helps solidify the
base of the fireplace and it allows the fireplace to be anchored at the base.
The alignment track is secured to the platform (or sub-floor). The freplace is then placed on top of it.
Before attaching the alignment track, make sure the platform (or sub-floor) is level and capable of
supporting the fireplace and vent. Use minimum ¾" plywood for the platform.
NOTE: The Maestro alignment track is a single piece – disregard steps "a" and "b" below.
a
b
c
Verify the Alignment Track is Level Before Proceeding
Use a level to verify the alignment track is level (check several spots across the entire
length). Use shims (or washers/spacers) under the track, if necessary, to make sure the
track is level.
© Travis Industries
Installation
(for qualified installers only)
3.375" 86mm
9/25/17-1468
3.375" 86mm
11
3.375" 86mm
Maestro