Display - Hach LXV321.99.00001 User Manual

Start Up
4.2.2

Display

Navigation key
Navigation key RIGHT/LEFT
Navigation key UP/DOWN
ENTER/ON
CLEAR/OFF
Vertical arrows
Cursor
> (arrow)
Figure 7 Display of results from the instrument with connected probe
1 Cursor
2 Vertical arrows
3 Input mode
16
In its basic setting, the display shows the main measurement variables and the date/time
(Figure 7). It can be set in a user-defined manner, see
Table 1 Navigating in the menu
Description
Navigation occurs with the RIGHT/LEFT navigation keys.
Navigation occurs with the UP/DOWN navigation keys.
– Confirm selection and entry with ENTER/ON.
– Switch the instrument on with ENTER/ON.
– Abort actions with CLEAR/OFF.
– Press CLEAR/OFF to return to the previous menu option or abort
entries.
– Switch the instrument off with CLEAR/OFF.
The vertical arrows in the display show that there are additional menu options or
measurement values above or below.
– The cursor points to the selected main menu option. Navigation occurs with the
RIGHT/LEFT navigation keys.
– The active decimal place is displayed.
The current selection is displayed
section 4.5, page
4 Current decimal place
5 Menu option
6 Active selection
18.