Install The Charger - Hach LXV321.99.00001 User Manual

Figure 2 Inserting the rechargeable batteries
1 Catch
2 Battery compartment
3 Battery clip
3.2.2

Install the charger

1
The battery charger must agree with local and national safety regulations and may not be part of the shipment. If the charger
is not part of the shipment, charge the batteries with a charger available in your country. Make sure that the charger agrees
the battery specifications.
1
Risk of fire and explosion.
Only use the battery charger to charge the rechargeable NiMH batteries, while batteries inside
the instrument.
1. Push the slide switch (item 2,
adapter (item 3, Figure
2. Fix the required adapter to the charger, until it audibly locks into place.
3. Insert the charging plug (item 3,
of the instrument.
4. Connect the power (100–240 V~/50–60 Hz).
4 Battery holder
5 rechargeable Batteries
6 Cap
WA R N I N G
Figure 3) on the back of the charger up and remove the
3).
Figure 4) into the charging socket (item 4,
Installation
Figure 4)
11