Figure 5. Installing the switch in a rack using the front rack-mounting brackets
Install the Switch in a Rack Using the Rear Rack-Mounting
Brackets With Rails
The switch package includes rear rack-mounting brackets with rails and screws for installation in a 19-inch
rack.
To install the switch in a rack using the rear rack-mounting brackets with rails:
1.
Attach the supplied rear rack-mounting brackets with rails to the sides of the switch.
2.
Insert the supplied rack-mounting screws through each bracket and into the bracket mounting holes in
the switch.
3.
Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket.
4.
Adjust the length of the brackets, align the mounting holes in the brackets with the holes in the rack,
and insert two pan-head screws with nylon washers through each bracket and into the rack.
5.
Tighten the screws with a No. 2 Phillips screwdriver to secure the brackets to the rack.
Fully Managed Stackable Switch M4300-96X
Installation
28