Poe Power Budgets - NETGEAR M4300-96X Hardware Installation Manual

PoE Power Budgets

The PoE power budget depends on the installed PSU or PSUs. The following table describes the possible
PoE power budgets. To calculate the PoE power budget, subtract from the available power 100W for the
switch system and 38W for each installed port card.
Table 8. PSU configuration and PoE budgets
PSU Configuration
Single APS600W
Dual APS600W
Single APS1200W
Dual APS1200W
One APS600W and
One APS1200W
Fully Managed Stackable Switch M4300-96X
Power Available PoE Power Budget
Input Power
110 VAC 600W 600W–110W–(38W x number of port cards)
220 VAC 600W 600W–110W–(38W x number of port cards)
110 VAC 1200W 1200W–110W–(38W x number of port cards)
220 VAC 1200W 1200W–110W–(38W x number of port cards)
110 VAC 1050W 1050W–110W–(38W x number of port cards)
220 VAC 1200W 1200W–110W–(38W x number of port cards)
110 VAC 2100W 1440W (You do not need to subtract wattage.)
220 VAC 2400W 1440W (You do not need to subtract wattage.)
110 VAC 1650W 1650W–110W–(38W x number of port cards)
220 VAC 1800W 1800W–110W–(38W x number of port cards)
Hardware Overview
23