Install The Switch In A Rack - NETGEAR ProSAFE S3300 Hardware Installation Manual

Install the Switch in a Rack

To install the smart switch in a rack, you need the 19-inch rack-mount kit supplied with the
smart switch.

To install the smart switch in a rack:
1. Attach the supplied mounting brackets to the side of the smart switch.
2. Insert the screws provided in the rack-mount kit through each bracket and into the bracket
mounting holes in the smart switch.
3. Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head
screws with nylon washers through each bracket and into the rack.
5. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack.
The following figure shows model S3300-52X-PoE+. However, you install the other S3300
models in the same manner.
S3300 Smart Switch
Installation
26