Table of Contents
Advertisement
When you insert a cable into an RJ-45 port on a port card, the switch automatically performs the following
actions:
•
Senses whether the cable is a straight-through or crossover cable.
•
Determines whether the link to the attached device requires a normal connection (such as when you
are connecting the port to a computer) or an uplink connection (such as when you are connecting the
port to a router, switch, or hub).
•
Automatically configures the RJ-45 port to enable communications with the attached device. The Auto
Uplink technology compensates for setting uplink connections while eliminating concern about whether
to use crossover or straight-through cables when you attach devices.
10GBASE-X and 1000BASE-X Transceiver Modules and Cables
for SFP+ Ports
To enable high-speed fiber and long-distance connections on the switch, port cards with SFP+ fiber ports
accommodate standard 10G and 1G SFP+ transceiver modules (gigabit interface converters, or GBICs)
and direct attach cables (DACs), which are sold separately from the port cards.
The port cards supports the following NETGEAR SFP and SFP+ transceiver modules and cables:
•
Short reach transceiver modules:
-
AGM731F. SFP transceiver 1000BASE-SX, SFP multimode LC GBIC
-
AGM734. SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC
-
AXM761. SFP+ transceiver 10GBASE-SR, SFP+ multimode LC GBIC
•
Long reach transceiver modules:
-
AGM732F. SFP transceiver 1000BASE-LX, SFP single mode LC GBIC
-
AXM762. SFP+ transceiver 10GBASE-LR, SFP+ single mode LC GBIC
-
AXM764. SFP+ transceiver 10GBASE-LR Lite, SFP+ single mode LC GBIC
•
1G/10GBASE-T transceiver modules:
AXM765. SFP+ transceiver 10GBASE-T, SFP+ copper RJ-45 GBIC
•
Direct attach cables:
-
AXC761. SFP+ 1m direct attach cable
-
AXC763. SFP+ 3m direct attach cable
-
AXC765. SFP+ 5m direct attach cable
-
AXC767. SFP+ 7m direct attach cable
-
AXC7610. SFP+ 10m direct attach cable
Fully Managed Stackable Switch M4300-96X
Hardware Overview
20
Advertisement
Table of Contents
Troubleshooting
