Install The Switch In A Rack - NETGEAR ProSAFE M4200 Series Hardware Installation Manual

a. Line up the back or bottom of the switch with the mount.
b. Insert the mount's locking tab and hook into the notches on the back or bottom of the
switch.
c. Slide the switch into the mount.

Install the Switch in a Rack

To install the switch in a rack, you need the 19-inch rack-mount kit supplied with the switch.
To install the switch in a rack:
1. Attach the supplied mounting brackets to the side of the switch.
2. Insert the screws provided in the product package through each bracket and into the bracket
mounting holes in the switch.
3. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head
screws with nylon washers through each bracket and into the rack.
5. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack.
Installation
Managed Switch Series M4200
26 Hardware Installation Guide