Advertisement

Quick Links

ASSEMBLE ONLY WITH ADULT SUPERVISION
ASSEMBLE ONLY WITH ADULT SUPERVISION
Please read through this instruction booklet to THOROUGHLY familiarize yourself with the assembly and flight characteristics of this airplane
Please read through this instruction booklet to THOROUGHLY familiarize yourself with the assembly and flight characteristics of this airplane
prior to assembly. Please inspect all parts carefully before starting assembly! If any parts are missing, broken or defective, or if you have any
prior to assembly. Please inspect all parts carefully before starting assembly! If any parts are missing, broken or defective, or if you have any
questions about the assembly or flying of this airplane, please call us at (217) 398-8970 and we'll be glad to help.
questions about the assembly or flying of this airplane, please call us at (217) 398-8970 and we'll be glad to help.
This product is suitable only for people of 14 years and older.
This product is suitable only for people of 14 years and older
This product is suitable only for people of 14 years and older.
®
®
Hobbico
Hobbico
Inc. guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not
Inc. guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not
cover any component parts damaged by use or modification. In no case shall Hobbico's liability exceed the original cost of the
purchased kit. Further, Hobbico, Inc. reserves the right to change or modify this warranty without notice. In that Hobbico, Inc. has no
control over the final assembly or material used for final assembly, no liability shall be assumed nor accepted for any damage resulting from
the use by the user of the final user-assembled product. By the act of using the user-assembled product, the user accepts all resulting
liability. If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this kit
immediately in new and unused condition to the place of purchase. To make a warranty claim send the defective part or item to Hobby
Services at the address below:
Hobby Services
3002 N. Apollo Dr. Suite 1
Champaign IL 61822 USA
© 2011 Hobbico
®
, Inc. All rights reserved.
Include a letter stating your name, return shipping address, as much contact information as possible
(daytime telephone number, fax number, e-mail address), a detailed description of the problem and a
photocopy of the purchase receipt. Upon receipt of the package, the problem will be evaluated as quickly
as possible.
Printed in China
WARRANTY
WARRANTY
HCAA2552 Mnl

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Micro Super Cub and is the answer not in the manual?

Questions and answers

Summary of Contents for Flyzone Micro Super Cub

  • Page 1 ™ ™ ™ ™ ASSEMBLE ONLY WITH ADULT SUPERVISION ASSEMBLE ONLY WITH ADULT SUPERVISION Please read through this instruction booklet to THOROUGHLY familiarize yourself with the assembly and flight characteristics of this airplane Please read through this instruction booklet to THOROUGHLY familiarize yourself with the assembly and flight characteristics of this airplane prior to assembly.
  • Page 2: Included Items

    INCLUDED ITEMS Check the parts against those shown. If any parts are damaged or missing, please call Hobby Services at: (217) 398-8970. FCC AND ETSI FCC REQUIREMENT This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference.
  • Page 3 4. Although the Micro Super Cub is designed to be successfully flown by the first time pilot, you may still benefit from the assistance of an experienced pilot for your first flights. If you’re not a member of an R/C club, your local hobby shop has information about clubs in your area whose membership includes experienced pilots.
  • Page 4: Prepare The Ttx402 Transmitter

    GLOSSARY ● Lithium Polymer (LiPo) Battery: Rechargeable battery which is used to power the airplane. LiPo batteries are lighter and smaller than most other types of rechargeable batteries. ● Transmitter (Tx): This is the hand-held unit that sends the signal to the control unit, or receiver (Rx). ●...
  • Page 5: Install The Wing Struts

    CHARGE THE 3.7V 130MAH LIPO BATTERY Do not use the charge feature while flying the Super Cub! Push in and slide to open the charge Leave the TTX402 port cover. unpowered. Insert battery to charge. Make sure the battery plug is oriented properly before inserting.
  • Page 6: Power The Ttx402 And Center The Trims

    POWER THE TTX402 AND CENTER THE TRIMS Illuminated red light indicates the TTX402 Leave the left stick is powered and transmitting. (throttle control) in the minimum position Center the rudder and during setup. elevator trims. Power switch “ON” . TRIM ADJUSTMENT Full extent.....
  • Page 7 CHECK THE CONTROL SURFACE DIRECTION Moving the right stick to the left causes the rudder to move left. Moving the right stick down causes the elevator to move up. CENTER THE CONTROL SURFACE DIRECTION Before flight, center rudder control Before flight, center elevator control surface with rudder trim adjustment.
  • Page 8 REVERSE THE CONTROL THROWS Unplug the battery from the plane before reversing the control throws. Only perform this procedure if the control surfaces move in the wrong direction. Press and hold one of the corresponding control surface trim buttons and cycle the power to reverse any control surface.
  • Page 9: Choose A Flying Site

    CHOOSE A FLYING SITE 5 minute flight times 8–10 minute flight times (outdoor) (indoor) RANGE CHECK With the transmitter turned on and the battery plugged into the Super Cub, walk 50' [15m] from the aircraft and check the control functions for proper operation. 50' [15m] FLYING THE SUPER CUB With the throttle stick in the full up position, hand launch the...
  • Page 10: Propeller Replacement

    PROPELLER REPLACEMENT To replace or reinstall the propeller, unpower the model, then hold the motor shaft with needlenose pliers and push the propeller back onto the shaft. Once re-installed, add a drop of CA glue to the propeller to hold it to the shaft. REPAIRS Repairs can be made to the Super Cub by using the following items: ●...
  • Page 11 notes...
  • Page 12 ™ ™...

Table of Contents