Table of Contents
Advertisement
7 Appendices
Troubleshooting
Error Messages
If an error message is displayed on the screen, take the
corresponding action.
Error Message
INSERT CARD
USE THE SETUP MENU TO SET
THE DATE.
FILE NUMBER OVER LIMIT
UNMATCHED FILE
INSUFFICIENT MEMORY.
CONTINUE?
PROTECTED
CARD IS WRITE-PROTECTED.
PRINT SETTINGS CANNOT BE
SET FOR THIS FILE.
INSUFFICIENT MEMORY
7
FORMAT INTERNAL MEMORY
INITIALIZE THE CARD.
CARD ERROR
WRITING TO DATA
NO FILE
CANNOT RECORD
REMOVE LENS CAP.
REMOVE LENS CAP AND
PRESS PLAYBACK BUTTON.
186
Cause and Action
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Use another card. P.159
The camera cannot display this file. Check the file contents
on your computer, and then delete the file.
Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card.
You are trying to delete a protected file.
The card is "Locked (write-protected)". Unlock the card.
This file (movie or other file) cannot be selected for printing. -
Files cannot be stored. Make sure there is enough free
space or delete unwanted files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
You must format the internal memory.
The card is not formatted. Format the card with this camera. P.137
Reformat the card. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The number of remaining shots is 0. Switch to another card
or the internal memory.
The camera does not start because the lens cap is still on
the camera. Remove the lens cap.
The camera does not start because the lens cap is still on
the camera. Remove the lens cap and press the 6
(playback) button or the POWER button to turn on the
camera.
Refer to
P.30
P.161
P.160
-
P.27
P.115
P.27
P.56
P.137
P.138
-
P.138
P.137
-
-
P.27
P.32
P.32
Advertisement
Table of Contents
Troubleshooting
