Camera Shake Correction - Ricoh CX1 User Manual

Camera Shake Correction

You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Display the shooting menu.
• For information on using the menu, see P.96.
2
Press the ADJ./OK button "
to select [Camera Shake
Correction] and press the
button $.
3
Press the button !" to select
[On].
4
Press the ADJ./OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• The camera shake correction function is not available for movie mode, continuous
mode, multi-target AF and long time exposure. If multi-target AF, or long time
exposure is set while the camera shake correction function is turned on, E
changes to F. E disappears when the mode dial is set to 3 or R.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.35)
4
117