Changing The Sensitivity (Iso Setting) - Ricoh Caplio 500SE User Manual

Changing the Sensitivity
(ISO SETTING)
ISO sensitivity indicates how sensitive film is to light. A greater
value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or a fast-moving object while
minimizing blurring.
You can choose from the following ISO settings:
AUTO, ISO 64, ISO 100, ISO 200, ISO 400, ISO 800, and ISO 1600.
When ISO setting is set to [AUTO], the camera automatically
changes the sensitivity according to the distance, brightness, zoom,
macro and picture quality/size settings. Usually, use the camera in
the [AUTO] mode.
If you do not want to allow the camera to change the ISO sensitivity,
select an ISO setting other than [AUTO].
1
Turn the mode dial to 5/K.
2
Press the MENU/OK button.
• The Shooting Setting menu is
displayed.
3
Press the " button to select
[ISO SETTING] and press the $
button.
4
Press the !" buttons to select
the desired setting.
5
Press the MENU/OK button, or
# button and press the MENU/
OK button.
• The setting appears on the screen.
Note ----------------------------------------------------------------------------------------------
• At the wide-angle zoom setting, when the ISO setting is set to [AUTO], the sensitivity
is ISO 125 to 800 with flash or ISO 64 to 351 without flash.
• The antiblur function does not work when the ISO setting is set to a setting other than
[AUTO].
• Images shot with a higher sensitivity may appear grainy.
1
81