Manitou Mattoc Pro Service Manual page 23

DAMPER SERVICE
Using a Manitou cassette tool and
8
adjustable wrench, unthread the
rebound damper assembly from the fork
stanchion.
Remove rebound damper assembly from
9
the fork. Once the damper assembly
is removed, clean the inside of the
stanchion with isopropyl alcohol and a
lint free towel. Inspect the inside and
outside of the stanchion for scratches
and other damage. Inspect rebound
damper for damage and replace if
necessary.
Use a 26mm crow's foot, Manitou
10
cassette tool, and torque wrench to
install the rebound damper assembly.
Torque to 60-80 in lb [6.8-9.0 N m
MATTOC PRO SERVICE MANUAL
23