Ricoh 3045 Printer Reference page 163

Problem
It takes too much The data is so large or complex that it takes time to process. If the Data In
time to resume indicator is blinking, data is being processed. Simply wait until printing
printing. resumes.
The machine was in the Energy Saver mode. To resume from the Energy Sav-
er mode, it has to warm up, and this takes time. See General Settings Guide.
Paper is not fed When you are using a Windows operating system, printer driver settings
from the selected override those set using the display panel. Set the desired input tray using
tray. the printer driver.
See the printer driver Help.
Solid lines are Make the following settings with the printer driver:
printed as broken
• Change the [Dithering:] setting on the [Image Adjustments] tab in the
lines.
[Change User Settings...] dialog box, on the [Print Quality] tab in the RPCS
printer driver.
See the printer driver Help.
Optional compo- You have to configure the option setup in printer properties when bidirec-
nents connected to tional transmission is not enabled.
the machine are
See the printer driver Help.
not recognized
when using Win-
dows 95 / 98 / Me,
Windows 2000 /
XP, Windows
Server 2003, and
Windows NT 4.0.
Images are print- The feed orientation you selected and the feed orientation selected in the
ed in the wrong printer driver's option setup might not be the same. Set the machine's feed
orientation. orientation and the printer driver's feed orientation accordingly.
See the printer driver Help.
The printed image With certain functions, such as enlargement and reduction, image layout
is different from the might be different to that on the computer display.
image on the com-
You might have selected to replace True Type fonts with machine fonts in
puter's display.
the printing process.
To print an image similar to that of the computer display, make settings to
print True Type fonts as an image.
See the printer driver Help.
Causes and Solutions
Troubleshooting
8
157