Ricoh 3045 Printer Reference page 161

Problem
When using Win- Make sure the application's paper size and orientation settings match those
dows 95 / 98 / Me of the printer driver.
/ 2000 / XP, Win-
If a different paper size and orientation are set, select the same size and ori-
dows Server 2003,
entation.
or Windows NT
4.0, combined
printing or book-
let printing does
not come out as
expected.
When using Win-
dows 95 / 98 / Me
/ 2000 / XP, Win-
dows Server 2003,
or Windows NT
4.0, Auto Re-
duce/Enlarge
print does not
come out as ex-
pected.
A print instruc- User Authentication may have been set. Consult the appropriate adminis-
tion was issued trators.
from the compu-
ter, but printing
did not start.
The print job is not Even when the machine is offline, printing is performed when [Job Acceptance
canceled even Priority] has been set in [Parallel Interface] in the [Interface Settings] in the System
when the machine Settings menu. Change the setting of Signal Control to Printer priority.
is switched to of-
See "User Tools (System Settings)", General Settings Guide.
fline status.
Photo images are Some applications reduce print resolution.
coarse.
Fine dot pattern Make the following settings with the printer driver:
does not print.
• Change the [Dithering:] setting on the [Image Adjustments] tab in the
[Change User Settings...] dialog box on the [Print Quality] tab in the RPCS
printer driver.
❒ To enable [Change User Settings...], select the [User setting] check box.
See the printer driver Help.
Images are cut off, You may be using paper smaller than the size selected in the application.
or excess is printed. Use the same size paper as that selected in the application. If you cannot
load paper of the correct size, use the reduction function to reduce the im-
age, and then print.
See the printer driver Help.
Causes and Solutions
Note
Troubleshooting
8
155