Ricoh 3045 Printer Reference page 125

❒ Staple printing will be canceled under the following conditions:
• If the number of staple jobs exceeds maximum. For information about the
maximum number, see "Specifications", General Settings Guide.
• If a paper size that cannot be stapled is selected. For information about pa-
per sizes that can be stapled, see "Specifications", General Settings Guide.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in the duplex mode and
the staple position.
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set, printing will continue
without stapling after the message has been displayed.
❒ When using the optional 2 Tray Finisher or Booklet Finisher, following paper
sizes can be stapled using the Mixed Size mode:
• A3 L and A4 K
• B4 L and B5 K
17 L and 8
• 11
11 K
1
/
2
Printing with the Finisher
119
4