Ricoh 3045 Printer Reference page 127

Punching Precautions
Limitation
❒ Punching cannot be done when paper is fed from the bypass tray.
Note
❒ If you cannot make punch settings even with the optional 2 Tray Finisher in-
stalled, options may not be set correctly in the printer driver. Correct option
settings in the printer driver. For details, see the printer driver Help.
❒ When duplex printing is selected, adjust punch positions according to bind-
ing orientation.
❒ Be sure to set the punch position the same as the staple position when using
it with the staple function.
❒ Be sure to set paper size and orientation in the printer driver when punching.
• Depending on the software you are using, print settings may not be ena-
bled and the printed result may not be as expected.
❒ Punch will be canceled under the following conditions:
• When a paper size that cannot be punched is selected. For information
about paper sizes that can be punched, see "Specifications", General Set-
tings Guide.
• If positions other than those fixed for punching are specified.
• If there are inconsistencies between the orientation in duplex mode and the
punch position.
• When feeding paper from the bypass tray.
• When the punch receptacle has become full and Auto Continue is set,
printing will continue without punching after the message appears.
Printing with the Finisher
121
4