Machine Preparation; Loading The Tape - Max Bepop CPM-200G Operation Manual

Machine Preparation
Loading the Tape
Pull up the opening/closing lever to open the door
1
cover.
Opening/Closing Lever
Pull up the front lever.
2
Place the tape on the tape holder.
3
Pull the tape forward and feed it under the bar
4
at the front. Then, feed the tape further into the
rollers in the back.
Vinyl Retainer
Front bar
7

Machine Preparation

5
Door Cover
Front bar
Vinyl Holder
6
Vinyl
Roller in the Back
7
Align the holes in the tape with the right and
left sprocket pins.
Ensure that the sprocket pins are inserted in the
sprocket holes in the tape and that the tape is
loaded straight on the roller.
If the sprocket pins are not inserted into the holes
or the tape is not straight, the tape will not be fed
properly.
Load the tape straight.
Yes
Lower the front lever to retain the tape.
Close the door cover until it "clicks" to lock.
Sprocket Pins
No
Front bar