Installing (Replacing) The Cutting Tool (Blade) - Max Bepop CPM-200G Operation Manual

Installing (Replacing) the Cutting Tool (Blade)
Check that the power is turned off, and pull up the
1
opening/closing lever to open the door cover.
Opening/Closing Lever
Move the cutting head to the center manually.
2
Loosen and remove the cap of the blade holder.
11
Machine Preparation
Prepare a new cutting tool (blade) and remove
3
its protective cap.
Door Cover
Insert/drop the blade into the blade holder
4
and tighten the blade holder cap. DO NOT
push the blade into the holder otherwise it
will not cut correctly.
Keep the cutting tool (blade) out of the reach
of children. If swallowed, seek immediate medical
attention.
When attaching or removing the cutting tool (blade),
be sure to turn off the power. Otherwise, you could be
injured by abrupt activation of the machine.
Do not touch the edge of the blade. You may be injured.
Blade
Edge of the Blade
Protective Cap
WARNING
CAUTION