Max Bepop CPM-200G Operation Manual page 25

4 Insert a Cut-line
1
In the cut-bar, choose the rounded rectangle shape.
2
Drag the cut-shape to fit your sign size.
Print
5
1
Insert the ink ribbon and tape roll into the machine.
2
Click on the color print icon
* To print in mono-color, clicko the mono-color print icon.
3
Click on the "Print" button.
.
4
The CPM-200 status monitor automatically opens.
Select the black ribbon, and click print.
5
After the print stops, the machine will rewind
the tape. Open the cover and exchange the
Black Ribbon with a Red Ribbon. (Once the
machine begins rewinding, it is possible to
exchange the ribbon)
6
Close the cover, select "Red Ribbon", and click
the print button. Next the machine will print in Red,
cut the sign shape, and then finally cut the tape.
Congradulations, your sign is complete!
* In the case that a color not used in the print data
is loaded in the machine, the message below will
be displayed. Change to a color that is used in the
layout data, and select "Print" to start printing.
BepopPC EX Software Installation
24