Specifications - Savaria Eclipse Owner's Manual

1. SPECIFICATIONS

Eclipse Specifications
Load capacity
Rated speed
Maximum travel
Maximum # of stops
Daily cycle
Power supply (circuit
supplied by others)
Lighting supply
(circuit supplied by
others)
Drive system
Operating
temperature
Cab sizes
Control system
Pit depth required
Minimum overhead
clearance
Cab panel finish
Control panel finish
Hall station finish
Standard features
Part No. 000841, 12-m01-2018
750 lb (341 kg), 950 lb (432 kg), 1000 lb (454 kg)
40 ft/min (0.2 m/s) nominal
50 ft (15.24 m); 60 ft (18.3 m) available where code is not applicable
6 stops
Normal: 40
Heavy: 80
Excessive: 150
Maximum starts in 1 hour on standard installation: 20
North America: 230 volt, single phase, 60 Hz, 20 amps
International: 220 volt, single phase, 50 Hz
120 volt, 60 Hz, 15 amps
Automatic 2 HP geared motor roller chain variable frequency drive,
complete with counterweight
° °
-10 C to +40 C (14
Types 1, 2, 3, 4 and 5:
• 36" x 48" x 80" (914 mm x 1219 mm x 2032 mm)
• 36" x 54" x 80" (914 mm x 1372 mm x 2032 mm)
• 36" x 60" x 80" (914 mm x 1524 mm x 2032 mm)
• 40" x 54" x 80" (1016 mm x 1372 mm x 2032 mm)
Micro-6 controller with diagnostics
6" (152 mm); 11" (279 mm) minimum with buffer springs
96" (2438 mm) for standard 80" cab, 114" (2896 mm) for 96" cab
Solid melamine or MDF panels (standard)
Unfinished veneer panels, finished recessed veneer panels, solid
hardwood raised panels (optional)
Clear or bronze anodized aluminum (standard)
Stainless steel or brass (optional)
Clear or bronze anodized aluminum (standard)
Stainless steel or brass (optional)
Automatic on/off cab lighting
Recessed gate pocket
Digital display in cab operating panel
Clear or bronze anodized aluminum cab entrance trim and handrail
Date plates, capacity tags
Modular rail sections
Unfinished plywood sub-floor
White ceiling with four LED lights
° °
F to 104 F)
Eclipse (Micro-6) Owner's Manual
5