Using the Adaptec SCSI Utility
The Adaptec SCSI utilit y detects the SCSI host adapters on the server board. The utility runs out of
BIOS and is used to:
•
Change default values
•
Check and/or change SCSI device settings that may conflict with those of other devices in the
server
Running the SCSI Utility
1. When this message appears on the video monitor:
Press Ctrl-A to run SCSI Utility...
2. Press
<Ctrl+A>
configure.
Another Adaptec utility that is available on the SDS2 Resource CD is the Adaptec EZ SCSI utility.
It is designed to be installed from diskettes on to a DOS or Windows operating system.
72
to run this utility. When it appears, choose the host adapter that you want to
Intel Server Board SDS2 Product Guide