Installation Of Windows 7 - Siemens SIMATIC IPC377E Operating Instructions Manual

7.6.1.3

Installation of Windows 7

Requirement
● You need the Recovery DVD for the operating system you want to install. It is included in
the product package.
● You ned to connect a mouse and a keyboard to your PC.
● You also need an USB DVD drive to your PC.
Procedure
1. Insert the Recovery DVD into the USB DVD drive.
2. Restart the device with the on/off button.
3. Press the <F10> key and select the USB DVD as the boot device.
After initialization, a boot menu is displayed.
4. In the boot menu, select the USB DVD drive using the cursor keys.
5. Confirm the selection by pressing Enter.
6. Immediately press any key when you see the following prompt to install the operating
system from the Recovery DVD.
Press any key to boot from CD or DVD ..
After a few seconds, you will see the "Install Windows" installation program. For setting
the boot sequence, refer to Boot Setup (Page 94).
7. Now follow the instructions in the installation program. You can find additional information
on this in the section: "Install Windows" installation program.
"Install Windows" installation program
The language of the installation program and the operating system you want to install has
been preset to English. You can install other languages of the operating system after the
installation.
Setting up partitions and integrating storage controllers unknown to the operating system
You can set up partitions during the installation process and integrate storage controllers that
are unknown to the operating system. To do so, select "Custom (advanced)" when prompted
for the installation type in the "Install Windows" installation program.
The following dialog windows are then available:
● Example 1: Windows installation window
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
Maintaining and repairing the device
7.6 Installing the software
59