Siemens SIMATIC IPC377E Operating Instructions Manual page 89

Hardware Monitor
In hardware monitor page, you can view and monitor the hardware status. See the hardware
monitor parameters below:
Item
system temperature
CPU temperature
VCORE
+3.3V
+5V
+12V
VCC3V
VSB3
VBAT
SIO Configuration
In Super IO configuration page, you can view and configure super IO chip parameters.
Serial port 1 configuration
Follow the instruction below to enable or disable the serial port 1.
1. Select the port which you want to set with the arrow keys and press Enter key.
2. Select Enabled or Disabled as you need and press Enter key in the active window pop-
up.
3. The enabled port can select corresponding Change Setting and Device Mode and press
Enter key.
4. Press F4 key and save the change.
The table below is the detailed port setting.
Port type
Serial port 1
Serial port 2
Serial port 3
Serial port 4
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
Description
Show the temperature inside chassis.
Show the CPU temperature.
Show VCORE power voltage.
Show +3.3V power voltage.
Show +5V power voltage.
Show +12V power voltage.
Show VCC3V power voltage.
Show VSB3 power voltage.
Show VBAT power voltage.
Change Settings
Auto
IO=3F8h; IRQ=4;
IO=2F8h; IRQ=3;
Auto
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=4;
Auto
IO=3E8h; IRQ=11;
IO=2E8h; IRQ=11;
Auto
IO=2E8h; IRQ=11;
IO=3E8h; IRQ=11;
Technical specifications
8.6 BIOS description
Device Mode
RS-232
RS-422
RS-485
RS-232
RS-422
RS-485
-
-
89