Expanding and assigning parameters to the device
6.1
Open the device
Requirement
● The device is disconnected from the power supply.
● All cables have been disconnected from the device.
● The device has been removed from the control cabinet.
● A screwdriver
Procedure – Opening the device
Note
The drive is located on the underside of the device cover.
• Carefully open the device.
• You cannot set the device cover down because of the connecting cable of the drive.
• You first have to pull out the connection plug in order to completely remove the device
cover.
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
6
45