Siemens SIMATIC IPC377E Operating Instructions Manual page 65

6. Click Next to continue the installation.
7. Select "Yes, I want to restart this computer now." and click Finish to restart the computer
for the changes to take effect.
Step 3: install LAN driver
1. Click Setup LAN Driver.
2. Click
3. Click Next to continue.
4. Select the radio button before "I accept the terms in the License Agreement", and
click Next to accept license agreement.
5. Set the setup option as you like and click Next.
6. Click Install to start the driver installation.
7. Click Finish.
The installation is completed.
Step 4: install Realtek AUDIO driver
1. Click Setup Audio Driver.
2. Click
3. Click Next to allow the system to start the installation.
4. Click Install to continue the installation.
5. Check the radio button next to "Yes, I want to restart my computer now." and click Finish
to restart the computer for the changes to take effect.
Step 5: install Touch driver
1. Click Setup Touch Driver.
2. Click
3. Click Yes to confirm the user account control question.
4. Click Next to continue the installation.
5. Select I accept the terms in the license agreement and
click Next to accept license agreement.
6. Click Next to continue the installation.
7. Set the touch calibration option.
8. Click OK to continue the installation.
9. Select "support Multi-Monitor System" and click Next.
10.Click Browse to select the folder you want to install the driver and then click Next. Or click
Next to install the driver on the default folder.
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
to install the chipset driver.
to install the Audio driver.
to install the Audio driver.
Maintaining and repairing the device
7.6 Installing the software
65