Siemens SIMATIC IPC377E Operating Instructions Manual page 97

After the system is rebooted, the new system configurations take effect.
Discard changes and reset
You can reboot the system without saving the changes with the following instructions.
1. Select Discard Changes and Reset with the arrow keys and press Enter key.
2. Select Yes and press Enter key to discard changes and reset. Or Select No to quit.
Defaults Options
Restore defaults
You can restore the system with the following instructions.
1. Select Restore Defaults with the arrow keys and press Enter key.
2. Select Yes and press Enter key to the load optimized defaults. Or Select No to quit.
Save as user defaults
You can save your settings as user default settings with the following instructions.
1. Select Save as User Defaults with the arrow keys and press Enter key.
2. Select Yes and press Enter key to save the settings as user defaults. Or Select No to
quit.
Restore user defaults
You can restore the user default settings with the following instructions.
1. Select Restore User Defaults with the arrow keys and press Enter key.
2. Select Yes and press Enter key to load optimized defaults. Or Select No to quit.
Boot override
All the available boot options are listed below the Boot Override. You can select any of the
options to boot from a particular device.
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
Technical specifications
8.6 BIOS description
97