Siemens SIMATIC IPC377E Operating Instructions Manual page 23

You can find this information on the rating plate and COA label. The rating plate is located on
the back of the unit. The COA label is only available with pre-installed Windows operating
systems and is affixed to the rear of the device.
Procedure
1. Transfer order number, serial number, production version (FS), and Ethernet addresses
from the rating plate. Below is an example of a product label.
Note
Replacement device without storage media
When you order a replacement device, remove all the storage media from your device,
for example HDD. Insert the storage media in the replacement device.
2. Take down the Windows "Product Key" from the COA label.
Example of a COA label
Microsoft Windows "Product Key" on the "Certificate of Authenticity" (COA):
The COA label is only attached to the rear of the device containing a Windows Embedded
Standard 7 or Windows 7 operating system.
● COA label of a device with Windows 7 operating system
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
Installing and connecting the device
3.1 Preparing for installation
23