SafeGait SG360 Service Manual page 8

12. Remove the spreader bar from the strap such that no weight is suspended.
13. Press the Calibrate Bias button in the VERTICAL axis (left side). The vertical Bias number should
change to the Load (Raw) value and the load (in lbs) should be 0 (zero).
14. Re-attach the spreader bar and let it hang. Wait for any swinging to cease.
15. Press the Calibrate Bias button in the HORIZONTAL axis (right side). The horizontal Bias number
should change to the Load (Raw) value and the load (in lbs) should be 0 (zero)
7
SG360-ISM-004 | REV F