Remote/Handheld Android 5.1 - SafeGait SG360 Service Manual

6. Handheld (V4.0.1) Android Version 5.1
□
In Settings ->System -> About phone, click on Build Number seven (7) times to enable
Developer Options.
□
Go to Settings -> System -> Developer Options and turn them On. Click OK to the popup
message.
□
In Settings -> System -> Developer Options -> Debugging, turn on USB Debugging. Click OK to
the popup.
□
Connect device to a PC with Android SDK installed, via USB cable.
□
On PC, open Command Prompt and enter the following command :

□
Check to see whether SafeGait application gets installed on the handheld. The command
prompt should also say 'Success'
□
Click on main screen
□
Click on app drawer
□
Drag SafeGait® app on to main screen
□
Turn off Developer Options.
□
Go to Settings -> Device -> Apps, scroll right to ALL and select Settings. Under here click on
"Clear Data"
□
Go to Settings and ensure Developer Options is absent.
adb install <path to the SafeGait apk>
68
SG360-ISM-004 | REV F