Version 4.0.1 Install instructions:
1. Instructions:
The purpose of this checklist is to verify that all necessary software components have been installed on
each hardware component of the SafeGait 360 Balance and Mobility Trainer. This ensures that the
system as a whole can run as anticipated.
Required:
Service Laptop with Android SDK installed.
USB stick with all necessary update files:
-
Actuator Installation Package V3.1.0
-
Kiosk UI software installer SafeGaitInstaller-4.0.1.msi
-
Handheld UI software installer SafeGait-Debug.apk (version 4.0.1)
KeePass file for all passwords associated with the updated system
Ethernet cable
Compact Flash Card reader (if necessary for optional install procedure), OR
Compact Flash card pre-installed with latest version of actuator software.
51
SG360-ISM-004 | REV F