SafeGait SG360 Service Manual page 65

□
Navigate to C:\Gorbel Medical\SafeGait\service and edit the file AdminService.exe.config.
Under the connectionStrings node, modify the SQL password to match the one in KeePass.
□
Navigate to C:\Gorbel Medical\SafeGait\bin and open an administrator command prompt.
Type install.bat and press Enter. When prompted for credentials, username = SAFEGAIT-PC,
password = Windows login password for the administrator (admin) account from Keepass. You
may get an error/warning message in the prompt window, but this is normal for updates.
□
Go back to the main IIS window and re-start the server.
□
Verify the SafeGait WebApi has been installed properly by opening Chrome and navigating to
https://localhost/safegait
security error acceptable as long as this page loads.
using the kiosk laptop. The page should load as shown below – the
64
SG360-ISM-004 | REV F