Start-Up - Alcatel ASM 180 TD User Manual

start-up

(see also C 10 )
READY/MAN. CYCLE
Basic display
4/27
Alphanumeric Control and Display
Panel (ACDP) operation
Unit
START UP
XX min YY sec
AUTOCALIBRATION
IN PROGRESS
CAL. COMPLETED
If MANUAL mode selected
FIL/ON : 1.0E-10
The basic display gives information which depends on the
operating mode (automatic or manual) in which the detector
was previously configured.
Using the basic display, the user can:
• start a test cycle (
• access the various configuration menus;
Pressing only the
basic display without modifying any configuration
parameters.)
• perform an autocalibration.
See the following pages for further details.
Alcatel Vacuum Technology France - ASM 180 TD/TD+ - ASM 181 TD+ User's Manual
The time is counted down until the
analyzer cell filament comes on.
The control panel and remote
control unit keys are not functional
during this start-up phase.
If AUTOMATIC mode selected
FILE # : 1
READY/AUTO CYCLE
or
C
F
key makes it possible to return to the
C 50
Basic display
key);