Purpose Of The Acdp Option - Alcatel ASM 180 TD User Manual

Purpose of the ACDP
Manual operation
Automatic operation
The ACDP panel operating instructions are given in the following pages.
We advise you to read them carefully in order to become familiar with its
operation.
At the end of C 50 (pages 26 and 27), the user will find a view of the front panel
of the option and a flow chart showing all the available functions.
2/27
Alphanumeric Control and Display
Panel (ACDP) operation
This option is intended for industrial inspection.
It is used to:
option
• display messages concerning the status of the detector;
• display the measurement in digital form;
• configure and control the unit in two operating modes
(manual or automatic);
• print inspection tickets using an external printer connected to
the associated interface (see B 40 ).
• To monitor the audio signal according to the selected
configuration
• The operator retains control of the test cycle start and stop
using the cycle key
• The Red and Green indicator lights (rejected part / accepted
part) come on according to the value of the Helium signal in
relation to the programmed manual reject level.
• The choice of test mode (gross leak, fine leak or sniffer) is up
to the user.
• The detector can be used as if it did not include this option
(see standard detector operation in C 20 ).
• The audio signal is working on a FIXED or FLOATING mode,
according to the selected configuration.
• The test cycle is automated according to the programmable
test parameters.
• It is possible to program up to 10 references of different
parts each with its own test parameters.
• At the end of each automatic cycle, the test result is
displayed, the part is sorted as "Accepted" or "rejected"
according to the programmed reject level.
• An audio signal could be activated, according to the result of
the test and the selected configuration.
Alcatel Vacuum Technology France - ASM 180 TD/TD+ - ASM 181 TD+ User's Manual
C
or the key on the ACDP.
C 50