Functions And Features; Mounting Options; Interface - Thermo Scientific AquaPro User Manual

14.2 Functions and Features

 1 to 4 Sensors for optimal cost per measurement point.
 Temperature measurement for all sensors (standard).
 NEMA 4X Enclosure for indoor/outdoor use.
 Wall, Pipe and ½ DIN Panel Mounting options.
 Very readable large color graphics display.
 Math Functions for % rejection, % pass and others.
 Data and Event Logs for 4 channels for 30 days (Standard).
 Front panel USB port for easy data log extraction, quick system configuration, field software upgrades.
 Calibration, System Setup, Diagnostics and Service Menus.
 Two 4 to 20 mA loop outputs per sensor (up to 8).
 Three Form C Relays for Alarm, Control and Wash (Standard).
 Option for six Form C Relays when up to 3 sensors are used.
 Full Featured PID function for process control.
 Digital protocol options for remote measurement, calibration, setup and diagnostics: Modbus,
Devicenet, Ethernet IP...
 6 cable ports for standard conduit and cordgrip fittings.

14.3 Mounting Options

 Wall Mount with Quick Disconnect mounting plate.
 ½ DIN Panel Mount.
 Pipe/Hand rail mount (vertical and horizontal).

14.4 Interface

 Display: 4.3 Inch Color Graphics with High Contrast
 Keypad: 7 Key menu navigation
Thermo Scientific AquaPro Analyzer User Guide 58