Lenovo ThinkSystem NE2572 Installation Manual page 43

6. Attach the filler plate (Item 9) and rear mounting brackets to the rear rack posts
with M6 screws (Item 3), and either clip nuts (Item 4) or cage nuts (Item 5). Torque
the screws to approximately 5.7 Nm ± 0.1 Nm (50 inch-pounds).
7. Secure the rear brackets to the front brackets with M3.5 screws (Item 6). Torque the
screws to approximately 0.5 Nm (4 inch-pounds).
8. If installing the 1U air-duct option, see the instruction on
9. Connect all external cables in accordance with the
page
10. Initialize the switch. See
11. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
© Copyright Lenovo 2018
9
7 8
36.
Chapter 5, "Initializing the
66).
3
1
6
"Cabling Guidelines" on
Chapter 3: Installing NE2572 Hardware and Options
5
page 47.
NE2572".
"Configuring Vital
43