Configuration Sheet - Siemens FDCIO223 Technical Manual

9.2

Configuration sheet

Mounting site
Mode of mounting
Configuration of input/output 'I/O 1'
Configuration of input/output 'I/O 2'
Ground fault monitoring for both inputs/outputs (jointly)
Parameters Input/output 'I/O 1'
Detector line type □ SynoLine300
□ Siemens/Cerberus, SynoLINE600
□ Siemens/Cerberus ex line
Alarm verification □ No
□ Yes => alarm verification time = _____s
End-of-line □ EOL22(Ex);obligatory in
Ex area, 20 V -voltage reference diode
Building Technologies
Fire Safety
Planning the type of application
Planning the detector line
________________
□ Without housing
□ With housing FDCH221
□ Siemens/Cerberus detector line, SynoLINE600
□ SynoLINE300 detector line
□ Contact input
□ Control line without confirmation
□ Inverted control
□ Reverse-polarity monitoring of control
□ Siemens/Cerberus detector line, SynoLINE600
□ SynoLINE300 detector line
□ Contact input
□ Control line without confirmation
□ Inverted control
□ Reverse-polarity monitoring of control
□ Yes
□ No
Input/output 'I/O 2'
□ SynoLine300
□ Siemens/Cerberus, SynoLINE600
□ Siemens/Cerberus ex line
□ No
□ Yes => alarm verification time = _____s
□ EOL22(Ex);obligatory in
Ex area, 20 V -voltage reference diode
Annex
65
009122_e1_en_--
2015-10-06