Standards And Directives Complied With - Siemens FDCIO223 Technical Manual

2.3

Standards and directives complied with

Building Technologies
Fire Safety
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
Personal injuries or damage to property caused by improper use and incorrect

application
Personal injuries or damage to property caused by disregarding safety

instructions in the documentation or on the product
Personal injury or damage to property caused by poor maintenance or lack of

maintenance
Disclaimer
We have checked that the content of this document matches the hardware and
software described. Despite this, we cannot rule out deviations and cannot
therefore assume liability for them matching completely. The details in this
document are checked regularly and any corrections needed included in
subsequent editions.
We are grateful for any suggestions for improvement.
A list of the standards and directives complied with is available from your Siemens
contact.
Safety
13
009122_e1_en_--
2015-10-06