About This Document - Siemens FDCIO223 Technical Manual

1

About this document

Target group
Product Manager
Project Manager
Installation personnel
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document contains information on the input/output module (transponder)
FDCIO223. Following the instructions consistently will ensure that the product can
be used safely and without any problems.
This document is only valid for input/output modules FDCIO223 with a product
version (ES) ≤45.
All input/output modules FDCIO223 with a product version (ES) ≥50 are
described in document 09122 from modification index 'f'.
This document is only available from the Customer Support Center CSC,
Tel. +49 89 9221-8000.
Target groups
The information in this document is intended for the following target groups:
Activity
Is responsible for information passing

between the manufacturer and
regional company.
Coordinates the flow of information

between the individual groups of
people involved in a project.
Coordinates the deployment of all

persons and resources involved in the
project according to schedule.
Provides the information required to

run the project.
Assembles and installs the product

components at the place of
installation.
Carries out a performance check

following installation.
Configure the product at the place of

installation according to customer-
specific requirements.
Check the product operability and

release the product for use by the
operator.
Searches for and corrects

malfunctions.
Carries out all maintenance work.

Checks that the products are in

perfect working order.
Searches for and corrects

malfunctions.
About this document
Qualification
Has obtained suitable specialist training for

the function and for the products.
Has attended the training courses for

Product Managers.
Has obtained suitable specialist training for

the function and for the products.
Has attended the training courses for Project

Managers.
Has received specialist training in the area of

building installation technology or electrical
installations.
Has obtained suitable specialist training for

the function and for the products.
Has attended the training courses for

commissioning personnel.
Has obtained suitable specialist training for

the function and for the products.
5
009122_e1_en_--
2015-10-06