Description Of The Device - Tech Controllers ST-292 User Manual

II.

Description of the device

ST-292 room regulator is intended for controlling the heating or cooling device (e.g. gas, oil or
electric furnace or the CH boiler controller). Its main task is to maintain the pre-set temperature in
the flat by sending a signal to the heating/cooling device (contact opening) when the desired
temperature is reached.
Advanced software enables the regulator to fulfil a wide range of functions:
 maintaining the pre-set room temperature
 manual mode
 day/night program
 weekly control
 control of the underfloor heating system (optional; an additional temperature sensor is
necessary)
Controller equipment:
 touch buttons
 front panel made of 3mm glass
 built-in temperature sensor
 batteries
Controller versions:
 v2 – wireless, with temporary backlight. It may be optionally equipped with a wireless
external sensor. This controller version cooperates with an additional signal receiver,
installed near the heating device.
 v3 – wired, with temporary backlight.
 v4 – wireless, intended for cooperation with an external controller (e.g. ST-266, ST-268)
4
TECH