Vii.c) Controller Functions; V.c.1) Block Diagram - Main Menu - Tech Controllers ST-292 User Manual

ST-292 User's manual
Parameters icons:
Time settings
Day from...
Night from...
Optimum start / heating-
cooling mode selection (in
service menu)
Enter service menu / zone
selection (ST-292v4)
Channel selection

VII.c) Controller functions

The user navigates the menu structure using
parameters, press MENU. Next, press MENU to view the controller functions – the edited
parameter is flashing whereas the remaining parameters are not displayed. Use
change the parameter settings. Press MENU to confirm the changes and move on to edit the next
parameter or press EXIT to confirm the changes and return to the main screen view.
V.c.1) Block diagram – main menu
Maximum floor temperature*
Floor sensor hysteresis*
Minimum floor temperature*
Pre-set comfort temperature
Pre-set economical temperature
Temperature sensor calibration
Day of the week
Time settings
Day from...
Night from...
Optimum start
Service menu
Weekly control
Floor sensor
Hysteresis
Weekly control settings
Floor sensor
Comfort temperature
Economical temperature
Hysteresis
Temperature sensor calibration
, , EXIT and MENU. In order to edit particular
Heating / cooling mode
Channel selection (ST-292 v2, ST-292 v4)
Zone selection (ST-292v4)
15
or to