Panasonic WJ-MPU955 Operating Instructions Manual page 22

RS232ALARM section
[CAUTION] This section should not be changed.
All RS232C ports can be set in Admin Console for the alarm interface. This section describes the characteristics
for the external alarm port only. Other use of the port, such as for an external controller, must be configured using
Admin Console.
[RS232ALARM]
***{ This section is optional. It is not required unless
***{ System defaults are not acceptable. Delete the
***{ single asterisks below to make this section active.
***{ Enable/Disable Serial Alarms by port
***{ Format: AlarmPort=<port 1>,<port 2>,<port 3>
***{ port # = use "1" to indicate desired port (only one) }
***{ port # = use "0" to indicate ports not desired
*AlarmPort=1,0,0
ALARMTEXTDISPLAY section
This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action text.
There is a 40 character maximum for alarm text.
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless
***{ System defaults are not acceptable. Delete the
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format
***{ Format: AlarmTextDisplay=<option>
***{ option 0 - Display Alarm Text only
***{ option 1 - Display both Alarm Text (20 chars)
***{ and Action Text (20 chars)
*AlarmTextDisplay=0
SYSTEM section
[CAUTION] This section should not be changed.
Use Admin Console to select the correct CPU size.
[SYSTEM]
***{ This section is optional. It is not required unless
***{ System defaults are not acceptable. Delete the
***{ single asterisks below to make this section active.
***{ Format: Keyboards=<num of controllers on this unit> }
***{ Cameras=<num of cameras on this unit>
***{ Monitors=<num of monitors on this unit>
*Keyboards=64
*Cameras=1024
*Monitors=256
ROUTING section
[CAUTION] This section should not be changed.
This section allows the setting of certain network parameters. If you believe changes are necessary, consult your
network administrator.
***{ This section is optional to the system. It is only required for external gateway.
***{ Only one default gateway entry is allowed!
***{ Format: default=<gateway IPA>
22
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}