I Priority Lock - Panasonic WJ-MPU955 Operating Instructions Manual

I Priority Lock

This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution: This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher priority operators may still gain control
of that monitor.
G Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] button while holding down
the [SHIFT] button will toggle the Priority Lock mode on
and off on the active monitor.
If the Priority Lock mode is selected, the monitor num-
ber with "L" sign is displayed on the active monitor and
the MONITOR LOCK indicator on the controller is on.
GROUP PRESET PREV NEXT
OPE ID S-CTL ID
LOG OUT
PAUSE STOP
CAM MENU OFF CAM MENU ON
GROUP
TOUR
F1 SEQ SEQ
F2
OSD MONITOR
CAM FUNC LOCK
OSD SERVICE
G Releasing Priority Lock
1. Select the desired monitor to release Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] button while holding down
the [SHIFT] button will release the lock mode.
The monitor number is displayed normally on the active
monitor and the MONITOR LOCK indicator on the con-
troller is now off.
T&D CAM ID GEN
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
MON STATUS
ALL
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
CLEAR
( ESC )
SHIFT BLK EXIT
47