I Priority Lock - Panasonic WJ-MPU955 Operating Instructions Manual

I Priority Lock

This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution: This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher priority operators may still gain control
of that monitor.
G Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] key while holding down the
[SHIFT] key will toggle the Priority Lock mode on and
off on the active monitor.
If the Priority Lock mode is selected, the monitor num-
ber with "L" sign is displayed on the active monitor and
the MONITOR LOCK indicator on the controller is on.
GROUP
PRESET
OPE ID
GROUP
SEQ
TOUR
SEQ
OSD
G Releasing Priority Lock
1. Select the desired monitor to release Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] key while holding down the
[SHIFT] key will release the lock mode.
The monitor number is displayed normally on the active
monitor and the MONITOR LOCK indicator on the con-
troller is now off.
30
INFORMATION
Mon Lock
PREV NEXT 1 2 3
T&D CAM ID GEN
S-CTL ID VER ALM S VLD S SYS S
PAUSE STOP
4 5 6
( ALARM )
MSTATUS ALL
ALM H VLD H
R E V F W D
7 8 9
RU N RU N
0
MONITOR CLEAR
LOCK (ESC)
OSD SERVICE
SHIFT BLK EXIT
INFORMATION
Mon Unlock