Default Sys.ini Configuration - Panasonic WJ-MPU955 Operating Instructions Manual

Central processing unit
Hide thumbs Also See for WJ-MPU955:
Table of Contents

Advertisement

Default SYS.INI Configuration

In most cases, you will not need to change the settings in the sys.ini file. However, if changes are necessary, the MPU955 CPU
must be rebooted.
Text appearing in blue is explanatory, and not part of the sys.ini file.
Interface section
The CPU can incorporate up to three Ethernet network interface cards.
[INTERFACES]
***{ Number of interfaces in the system}
Numinterfaces=3
The number used here is the number of the Ethernet ports on MPU955 CPU.
***{ Interface Definitions
***{ Interface<Number>=<IPA>,<SUBNET MASK>,<BOOT SERVER IPA> }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU
***{
hardware settings in order for the System to
***{
operate correctly!!
***{ MainA CPU }
In a standalone system, the MPU955 CPU should use the IP addresses that follow. In this case, the {MainB
CPU}'s interface numbers should be commented with asterisks.
Interface0=192.168.200.200,255.255.255.0,192.168.200.200
Interface0 is an interface for GX devices.
Interface1=172.18.0.1,255.255.0.0,172.18.0.1
Interface1 is an interface for system controller.
Interface2=172.16.192.1,255.255.0.0,172.16.192.1
Interface2 is used for SNMP, SNTP feature. (Not currently supported)
***{ MainB CPU }
In a redundant system, the second MPU955 CPU should use following IP addresses (remove the asterisks
below). In this case, {MainA CPU}'s interface numbers should be commented with asterisks.
*Interface0=192.168.200.201,255,255,255,0,192.168.200.201
*Interface1=172.18.0.2,255.255.0.0,172.18.0.2
*Interface2=172.16.192.2,255.255.0.0,172.16.192.2
Frames section
[CAUTION] This section does not apply to the MPU955 system, and should not be changed.
[FRAMES]
***{ MX Frame definition from Admin file
***{ MXSW has format <num_rows>,<num_cols>,<interface_num> }
***{ All others use <num_functions>,<interface_num>
***{ All 0's used for digital-only systems.
MXSWFunction=0,0,0
MXCONTFunction=0,0
MXOSDFunction=0,0
MXDIOFunction=0,0
MXRMSFunction=0,0
}
}
}
}
}
}
19

Advertisement

Table of Contents
loading

Table of Contents