Table of Contents
Advertisement
I Digital Video Encoder Devices
Digital video encoder devices refer to MPEG2 video encoder devices (WJ-GXD900). They connect to the CPU unit through an
Ethernet switching hub in an IP based network. See reference [2].
G Connect with CPU unit
The video encoders connect with the CPU unit through its Ethernet port (see Panel Details y) and one or more switching hub
units. The system can support up to 256 video encoder devices.
TRIGGER OUT
ALARM IN
RESET
ON OFF
100BASE-TX
TERM
RS-485
4 3 2 1 G 4 3 2 1 GGV + – G
4
3
2
1
VIDEO IN
VIDEO OUT
G Setup from Administration Tool
In order to be added to the Network Security System, an encoder device must be entered into the digital device database. In
Admin Console, select Switch Nodes from the Domain menu, select Digital (GX) from the sub-menu that appears, and then
enter the information for the encoder device. Please note, you need to know the Rotary Switch (SW1 A, B, C) readings from the
encoder device. Rotary Switch settings must be unique for all the encoder and decoder devices. See reference [1].
POWER
ON
OFF
AUDIO IN
SIGNAL
GND
Switching HUB
10BASE-T / 100BASE-TX
SYSTEM
CONTROLLER
DATA 12
DATA 11 DATA 10
PERIPHERAL INTERFACE (RS-232C)
1
192.168.200.200
ENCODER
OTHER
DECODER
SYSTEM
(RS-485)
CONTROLLER
DATA 9
DATA 8
DATA 7
DATA 6
DATA 5
DATA 4
DATA 3
DATA 2
DATA 1
PARALLEL
REDUNDANT
SATELLITE
CPU
MODE
2
3
NO
YES
STANDALONE
SATELLITE
SIGNAL
GND
125V 6.3A
AC IN
11
Advertisement
Table of Contents
Troubleshooting
