Log-In And Log-Out; I Log-In - Panasonic WJ-MPU955 Operating Instructions Manual

Log-in and Log-out

Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures apply when the WV-CU360C
System Controller is connected to the system.

I Log-in

1. Turn on the power switches of all system components.
2. Turn on the power of the WV-CU360C System
Controller by connecting the AC adapter to the AC out-
let.
The LINK indicator lights up and "NO USER" will appear
on the LED display of the system controller.
3. Select your registered operator ID number (up to 5 dig-
its) by pressing the numeric buttons, then press the
[CAMERA (ENTER)] button.
The underline display now appears on the LED display
of the controller.
AUX1 OFF
AUX2 OFF
DEF OFF
44
PROGRAM
PRESET
T&D CAM ID GEN
AUX1 ON WIPER
ALM S VLD S SYS S
MON STATUS ALL
CALL
PRESET
AUX2 ON
ALM H VDL H
DEF ON
CLEAR
CAMERA
( ESC )
( ENTER )
SHIFT BLK EXIT
AUTO
PAN
4. Select your registered Password (up to 5 digits) by
pressing the numeric buttons, then press the [CAM-
ERA (ENTER)] button.
T&D CAM ID
AUX1 OFF AUX1 ON
ALM S VLD S
MON STATUS
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
SHIFT BLK
If operator ID and password are correct, "READY" will
appear on the LED display.
Note: If an operator ID and password error have
occurred, the PROHIBITED indicator on the con-
troller will light up and "NO ACCESS" will blink on
the LED display for about 3 seconds. Then the
Log-in procedure automatically returns to the start.
PROGRAM
PRESET
GEN
WIPER
SYS S
ALL
CALL
PRESET
CLEAR
CAMERA
( ESC )
( ENTER )
EXIT
AUTO
PAN