2.2.1
Installing IC Socket
After checking the location of pin 1 on the IC socket, determine where to install the IC socket by
using the guide pins provided as shown in figure 3. Apply epoxy resin adhesive to the end of the
four projections at the bottom of the IC socket, and fasten it to the user system before soldering.
Pin 1
4 projections to apply
epoxy resin adhesive to
Bottom view of IC socket
2.2.2
Soldering IC Socket
After fastening, solder the IC socket for an TFP-100G package to the user system. Be sure to
completely solder the leads so that the solder slops gently over the leads and forms solder fillets.
(Use slightly more solder than the MCU.)
6
User system
Figure 3 Location Setting of IC Socket
Guide pins
IC socket
(NQPACK100SE
manufactured by
Tokyo Eletech Corporation)