Sip Trunk Port Allocation - NEC Univerge SV9300 Programming Manual

3.4
SIP Trunk Programming Guide
The SV9300 must be reset in order for the change to take effect.

SIP Trunk Port Allocation

All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 6 CM 1003 SIP Trunk Port Allocation
1. Select SV9300 Main/Remote Unit No. accommodating SIP Trunk
Channels, then click Read to get the current data settings.
2. Enter Trunk Numbers used for the voice channels.
3. Click Apply.
Command Line Example: Unit 01
CM 1003>01000>D001
CM 1003>01001>D002
CM 1003>01002>D003
CM 1003>01003>D004
(Unit 01 SIP Trunk Channel 1)
(Unit 01 SIP Trunk Channel 2)
(Unit 01 SIP Trunk Channel 3)
(Unit 01 SIP Trunk Channel 4)
Issue 1.0
11